An oil rig has working production systems which normally produce around the clock and should not be shut down due to minor electrical faults. The use of ungrounded systems (floating systems) with appropriate monitoring devices from Bender ISOMETER® can guarantee this. Personal protection must also be ensured in the accommodation and supply units. This involves, for example, monitoring with RCMS residual current systems which allow the fastest possible warning and shutdown. All system data can be transferred to a central control point.
A Floating Production Storage and Offloading Unit (FPSO) is a ship used for extraction, storage and offloading of petroleum and natural gas. In offshore operations, FPSOs are used because they obviate the need of constructing a complicated, expensive pipeline infrastructure to the extraction site. Bender kits out these ships with the appropriate ISOMETER® technology to ensure maximum safety.
| Name | Category | Size | Language | Timestamp | D-/B-Number |
|---|---|---|---|---|---|
| Product Overview ISOMETER®/ISOSCAN® | Product Overviews | 5.3 MB | EN | 2024/02/1616.02.2024 | |
| Product Overview - Residual Current Monitoring | Product Overviews | 6.3 MB | EN | 2024/10/2929.10.2024 | |
| Insulation Fault Location - Planning and Setup | Technical Article | 112.4 KB | EN | 2019/05/1313.05.2019 | |
| Electrical Safety in Control and Auxiliary Circuits | Technical Article | 632.6 KB | EN | 2019/05/1313.05.2019 |
Products
Extension of the nominal voltage range of ISOMETER® iso685… series to AC 0…1150 V, DC 0…1760 V
Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V
Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V
Ground-fault detector for ungrounded AC/DC systems
Ground-fault detector for subsea cable monitoring
Monitor for use in high-resistance grounded systems
Portable ground-fault location systems for ungrounded and grounded systems
Multi-channel AC/DC ground-fault monitor
Multichannel AC, pulsed DC and AC/DC sensitive ground-fault monitor
Multi-channel AC/DC ground-fault monitor with individual relay outputs
Multichannel AC, pulsed DC and AC/DC sensitive ground-fault monitor with one alarm contact per channel
Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems
Extension of the nominal voltage range of ISOMETER® iso685… series to AC 0…1150 V, DC 0…1760 V
Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V
Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V
Ground-fault detector for ungrounded AC/DC systems
Ground-fault detector for subsea cable monitoring
Monitor for use in high-resistance grounded systems
Portable ground-fault location systems for ungrounded and grounded systems
Multi-channel AC/DC ground-fault monitor
Multichannel AC, pulsed DC and AC/DC sensitive ground-fault monitor
Multi-channel AC/DC ground-fault monitor with individual relay outputs
Multichannel AC, pulsed DC and AC/DC sensitive ground-fault monitor with one alarm contact per channel
Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 8: Isolationsüberwachungsgeräte für IT-Systeme
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V – Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 9: Einrichtungen zur Isolationsfehlersuche in IT-Systemen
Elektrische Sicherheit in Niederspannungsnetzen bis 1000 V AC und 1500 V DC - Geräte zum Prüfen, Messen oder Steuern von Schutzsystemen - Teil 15: Anforderungen an die funktionale Sicherheit von Isolationssteuergeräten in IT-Systemen und Geräten zur Erkennung von Isolationsfehlern in IT-Systemen
Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
Mobile and fixed offshore units - Electrical installations - Part 2: System design
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
